Drill Dust Collector
Catch the dust before it hits the floor.
- Rides on the bit through a center hole, fits up to a 14 mm bit.
- Catches dust when you drill up or into a wall.
- Side port takes a 1-1/4 inch shop-vac hose.
- One-piece print, no supports.
Ships printed to order, ready to use. Or download the STL and print it yourself.
- Sized to your exact portReal specs, not guesswork
- Made in the USAPrinted to order
- Ships in 2 to 3 daysFast and tracked
- PETG, not brittle PLABuilt for the shop
About This Part
A little cone cup that rides on your drill bit. Slide it onto the bit through the center hole. When you drill into a wall or a ceiling, the dust drops into the cup instead of down your arm and onto the floor.
Hook a shop vac to the side port and it pulls the dust away as you go. Great for finished rooms where a mess is a real problem.
It prints in one piece with no supports. The side port angles up, so the hose routes toward the drill and nothing needs support. Cheap to make, easy to keep in the bag.
Who it is for: Electricians, installers, and homeowners drilling overhead or in finished rooms.
Specs
Drill Dust Catcher FAQ
How does a drill dust collector work?+
You slide the cup onto your drill bit through the center hole. As you drill, the dust falls into the cup. A shop vac on the side port pulls it away, so it never reaches the floor.
Do I have to use a shop vac with it?+
No. The cup catches the dust on its own for light jobs. For bigger jobs or a cleaner result, hook a 1-1/4 inch shop-vac hose to the side port and it pulls the dust away as you drill.
What size drill bit does it fit?+
The center hole fits up to a 14 mm bit. If you need it for a bigger bit, ask us and we print the hole to size.
