Use two fingers to spin the part.
End Cap
4 in End Cap
Pick your sizes
Size
- 1.25 in$11.99
- 1.5 in$11.99
- 1.875 in$12.99
- 2 in$12.99
- 2.5 in$13.99
- 3 in$14.99
- 4 in$16.99 (this size)
- 6 in$23.99
Openings4 in
Overall size107 x 107 x 26 mm
MaterialPETG
Made inthe USA
$16.99
Ships in 3 to 5 business days.
3D printed in PETG and made to order. Shipping is a flat $7.95 anywhere in the US.
Color: Black
Black
Charcoal
White
Printed to standard 4 in (101.6 mm) duct size. It pushes on and holds in most setups.
- Standard sizesStandard size shown
- Made in the USAPrinted to order
- Flat $7.95 shippingOne rate, anywhere in the US
- PETG, not brittle PLABuilt for the shop
About this End Cap
An end cap caps a duct end you are not using. It slides into the open port at the standard size you pick, so the air stays in the line and all the pull goes to the tool you are running.
Set one size, the inside of the duct it plugs. The socket grips the wall and holds in most setups.
Popular searches
- dust collection end cap
- duct end cap
- shop vac port plug
Printed to order in PETG, made in the USA. Why we use PETG.
Size help
Measure your hose or duct first, in inches or millimeters. Our measuring guide shows how.
Other sizes
Part
4 in End Cap
SKU GD-FIT-CAP-102
Fit
4 in
Material
PETG
Origin
Made in the USA
Printed to order
