Use two fingers to spin the part.
22.5 Degree Elbow
3 in 22.5 Degree Elbow
- 1.25 in$15.99
- 1.5 in$16.99
- 1.875 in$17.99
- 2 in$18.99
- 2.5 in$20.99
- 3 in$23.99 (this size)
- 4 in$29.99
- 6 in$53.99
Ships in 3 to 5 business days.
3D printed in PETG and made to order. Shipping is a flat $7.95 anywhere in the US.
Printed to standard 3 in (76.2 mm) duct size. It pushes on and holds in most setups.
- Standard sizesStandard size shown
- Made in the USAPrinted to order
- Flat $7.95 shippingOne rate, anywhere in the US
- PETG, not brittle PLABuilt for the shop
About this 22.5 Degree Elbow
A 22.5 degree elbow is the gentlest bend we make. The soft angle keeps the air moving with the least drag, so you hold onto more suction at the tool than a sharper turn.
Put two together and you get a smooth 45 with an even softer path. Both ends are the same size. One smooth bore runs the whole bend, so to change size across a corner, put a straight adapter next to the elbow.
Each end is printed to the standard size you pick and pushes on in most setups.
Popular searches
- dust collection elbow
- 22.5 degree duct elbow
- gentle duct bend
Printed to order in PETG, made in the USA. Why we use PETG.
Size help
Measure your hose or duct first, in inches or millimeters. Our measuring guide shows how.
