Use two fingers to spin the part.
90 Degree Elbow
4 in 90 Degree Elbow
- 1.25 in$17.99
- 1.5 in$19.99
- 1.875 in$22.99
- 2 in$23.99
- 2.5 in$29.99
- 3 in$37.99
- 4 in$58.99 (this size)
Ships in 3 to 5 business days.
3D printed in PETG and made to order. Shipping is a flat $7.95 anywhere in the US.
Printed to standard 4 in (101.6 mm) duct size. It pushes on and holds in most setups.
- Standard sizesStandard size shown
- Made in the USAPrinted to order
- Flat $7.95 shippingOne rate, anywhere in the US
- PETG, not brittle PLABuilt for the shop
About this 90 Degree Elbow
A 90 degree elbow turns your duct a full right angle for a tight corner or a drop straight down. The smooth inside curve keeps the air moving better than a hard miter joint.
Both ends are the same size. One smooth bore runs the whole bend. To change size across a corner, put a straight adapter next to the elbow.
Each end is printed to the standard size you pick and pushes on in most setups.
Popular searches
- dust collection elbow
- 90 degree duct elbow
Printed to order in PETG, made in the USA. Why we use PETG.
Size help
Measure your hose or duct first, in inches or millimeters. Our measuring guide shows how.
