Use two fingers to spin the part.
Wye
4 in x 4 in x 2 in Wye
Pick your sizes
Run size
- 2 in$19.99
- 2.5 in$21.99
- 3 in$22.99
- 4 in$25.99 (this size)
- 6 in$36.99
Branch size
- 1.25 in$22.99
- 1.5 in$23.99
- 1.875 in$25.99
- 2 in$25.99 (this size)
- 2.5 in$28.99
- 3 in$35.99
Openings4 in, 4 in, 2 in
Overall size183 x 110 x 181 mm
MaterialPETG
Made inthe USA
$25.99
Ships in 3 to 5 business days.
3D printed in PETG and made to order. Shipping is a flat $7.95 anywhere in the US.
Color: Black
Black
Charcoal
White
Printed to standard 4 in (101.6 mm) and 2 in (50.8 mm) duct sizes. It pushes on and holds in most setups.
- Standard sizesStandard size shown
- Made in the USAPrinted to order
- Flat $7.95 shippingOne rate, anywhere in the US
- PETG, not brittle PLABuilt for the shop
About this Wye
A wye splits one duct run into two at a gentle 40 degree angle. The soft angle keeps the air moving with less drag than a sharp tee, so you lose less pull when two lines share a run.
Size all three ends on their own: the two run ends and the branch. Each end is printed to the standard size you pick and pushes on.
Popular searches
- dust collection wye
- wye splitter
- duct branch fitting
Printed to order in PETG, made in the USA. Why we use PETG.
Size help
Measure your hose or duct first, in inches or millimeters. Our measuring guide shows how.
Other sizes
- 1.25 x 1.25 x 1.25 in
- 1.5 x 1.5 x 1.25 in
- 1.5 x 1.5 x 1.5 in
- 1.875 x 1.875 x 1.25 in
- 1.875 x 1.875 x 1.5 in
- 1.875 x 1.875 x 1.875 in
- 2 x 2 x 1.25 in
- 2 x 2 x 1.5 in
- 2 x 2 x 1.875 in
- 2 x 2 x 2 in
- 2.5 x 2.5 x 1.25 in
- 2.5 x 2.5 x 1.5 in
- 2.5 x 2.5 x 1.875 in
- 2.5 x 2.5 x 2 in
- 2.5 x 2.5 x 2.5 in
- 3 x 3 x 1.5 in
- 3 x 3 x 1.875 in
- 3 x 3 x 2 in
- 3 x 3 x 2.5 in
- 3 x 3 x 3 in
- 4 x 4 x 2.5 in
- 4 x 4 x 3 in
Part
4 in x 4 in x 2 in Wye
SKU GD-FIT-WYE-102-102-051
Fit
4 x 4 x 2 in
Material
PETG
Origin
Made in the USA
Printed to order
