Thien Baffle Separator
Thien Baffle Dust Separator Lid for 10 Gallon Bucket with 4 inch Ports
SKU: GD-SL-TB-10G-4
Not for sale yet
This one is made to order in our large-part run. Join the list for it.
Build this adapter on demand
We print to order. Drop your email and we add you to the list for this part.
Drops onto a standard 10 gallon bucket, with a 4" inlet and a 4" outlet.
- Standard sizesStandard size shown
- Made in the USAPrinted to order
- Flat $7.95 shippingOne rate, anywhere in the US
- PETG, not brittle PLABuilt for the shop
About This Separator
Catch chips and fine dust before they hit your vacuum, so your filter stays clean and your suction holds. This thien baffle separator lid drops onto a standard 10 gallon bucket. Connect your shop vac or dust collector to the outlet port and your tool hose to the inlet port.
The internal baffle drops chips and dust into the bucket, so most of the mess never reaches your filter. It is printed in PETG, so it stands up to shop heat and solvents and will not crack like brittle PLA. Bucket rims vary by brand. Measure your rim.
What You Get
- One PETG thien baffle lid for a 10 gallon bucket
- An inlet port for your tool hose and an outlet port for your vac (4")
- A vortex or baffle, so most chips and dust drop into the bucket
- A cleaner filter, so your suction holds longer between cleanings
How it fits
- 1
Set the lid onto your 10 gallon bucket and press it down.
- 2
Connect your shop vac or dust collector to the outlet port.
- 3
Connect your tool hose to the inlet port.
- 4
Run the vac and the chips drop into the bucket, not your filter.
Size help
Measure your hose or duct first, in inches or millimeters. Our measuring guide shows how.
Common questions
Will it fit my bucket?
The rim is sized for a standard 10 gallon bucket. Bucket rims differ a little by brand, so measure your rim and pick the lid that matches it.
How much dust does it catch?
Most of it. The vortex or baffle drops chips and fine dust into the bucket before they reach your vacuum, so your filter stays cleaner and your suction holds.
What hose sizes does it take?
The inlet and outlet ports are sized for 4" and 4" connections. Use an adapter on either port if your hose is a different size.
What is it made of?
PETG. It handles shop heat and common shop solvents and takes knocks without cracking like brittle PLA.
Build the adapter for your two sizes
Measure your tool and your vac, so more dust goes in the vac and less in the air you breathe.
Build My Adapter