RK3441K dust collection adapter and shop vac hose guide
Measure to order
Dust port
Look at the dust port on your Rockwell RK3441K. If it sticks out like a tube, measure the outside. On the RK3441K, if it is a hole, measure the inside. Use calipers.
Get the adapter for this Rockwell RK3441K.
Tell us the size you measured at the port and the size you measured at the hose, and we print both ends to those two numbers.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
Rockwell 4-1/2 in. Compact Circular Saw
Specifications
Connect your Rockwell RK3441K to your shop vac
Measure the RK3441K port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The Rockwell RK3441K is a compact circular saw with a 4-1/2 in. blade. Small saws like this live on plywood and trim cuts, and they throw dust straight at your cut line.
The dust outlet sits at the rear. We print a GulpDust PETG adapter to your outlet measurement on one end and to your shop vac hose on the other end.
Rockwell RK3441K Specs
| Port location | Rear |
|---|---|
| Connection type | Press on |
| Blade size | 4-1/2 in. |
Rockwell RK3441K Dust Outlet: What Connects To It
The RK3441K has a dust outlet at the rear. We print the PETG adapter to the size you measure there.
The saw also ships with a vacuum adaptor that pushes onto that outlet. Our adapter works either way, straight on the saw or onto the OEM piece.
The far end takes your shop vac hose, so the whole chain is press fit from the saw to the vac.
Keeping the Line Clear on a Compact Saw
A 4-1/2 in. saw is made for one hand work on thin stock. The blade sits close to your eye line and so does the dust.
With the vac pulling at the outlet, the chips leave through the hose. You see the line and the shoe rides flat.
It also keeps trim work indoors from turning into a cleanup job.
How to Connect a Shop Vac to the Rockwell RK3441K
Wipe the dust outlet clean so the adapter seats all the way.
Press the tool end of the PETG adapter onto the outlet. We print it to the size you measure, so it holds with a firm press. Then press your shop vac hose onto the other end.
Turn the vac on before the blade touches wood. A clear line means a straight cut, and the fine dust goes into the vac instead of the air.
Rockwell RK3441K Dust Collection FAQ
What fits the dust outlet on the Rockwell RK3441K?+
Our PETG adapter does. One end presses onto the saw outlet. The other end takes your shop vac hose.
Can I use the adapter with the vacuum adaptor that came with the saw?+
Yes. Our adapter works on the bare outlet or on the OEM piece, whichever you have on the saw.
Will my shop vac hose fit the RK3441K on its own?+
No. Most shop vac hoses are 1-7/8 inch or 2-1/2 inch, so measure the port on your tool and the hose end on your vac. The GulpDust adapter steps the connection to your hose size.
I lost the included adaptor. Can I still hook up a vac?+
Yes. Our adapter goes straight onto the saw outlet, so you do not need the OEM piece at all.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
