DeWalt DWP611 Compact Router Dust Collection Port Adapter
Dust port
We fit it Round port, friction
Our adapter is made for the DeWalt DWP611 port. It presses on by hand and holds, so there is nothing to clamp or tape.
Get the adapter for this DeWalt DWP611.
Tell us what you are connecting to and we print it to fit. Both ends are a push fit, so there is nothing to clamp or tape.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
DeWalt DWP611 1-1/4 HP Compact Router
Specifications
Full port and fit detail for this tool
The DeWalt DWP611 is the 1-1/4 HP compact router. People call it the DeWalt 611 or the trim router. It runs at high speed and throws a pile of chips in seconds, which is fine outside and awful on a finished floor.
The router collects dust through a round port on the base. A GulpDust PETG adapter fits that port on one end and your shop vac hose on the other end. No tape. No clamps.
DeWalt DWP611 Specs
| Port shape | Round |
|---|---|
| Connection type | Friction fit |
| Motor | 1-1/4 HP |
DeWalt DWP611 Dust Port: What Fits It
The dust port on the DWP611 is round and sits on the router base. Our adapter is made to fit it.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. Neither one fits a router port on its own. That gap is why chips spray sideways instead of going down the hose.
A GulpDust adapter is printed to match the router port on one end and your vac hose on the other end. It grips both, so the router pulls chips straight into the vac.
Hooking the DWP611 to a Shop Vac
Unplug the router first. Then wipe the dust out of the port so the adapter seats clean and grips all the way around.
Press the tool end of the PETG adapter into the port. It is a friction fit, so a firm push is all it takes. Then press your shop vac hose onto the other end.
Turn the vac on before the bit touches the wood. A router throws chips from the first inch of the cut, and a clear line means a cleaner edge.
Keep the hose short and out of your path. A long hose drags on the router and pulls you off your line.
DWP611 and DCW600: Corded and Cordless, Same Port
The DWP611 plugs into the wall. The DCW600 is the same compact router on a 20V MAX battery.
Both take the same dust port adapter. If you own one of each, you only need one part.
That is why the connector page lists both routers. Pick whichever page you landed on and the part is the same.
Running a DWP611 on a CNC
The DWP611 is the most common spindle on a Shapeoko or an X-Carve. It is cheap, it is quiet enough, and every mount fits it.
On a CNC the dust comes off the bit in every direction, so the port adapter alone will not catch it. That job needs a dust shoe, a collar that wraps the router body with a brush skirt.
We do not make a dust shoe for this router. What we make is the port adapter, and that is the right part when the router is in your hands instead of on a gantry.
DeWalt DWP611 Dust Collection FAQ
Will a GulpDust adapter fit the DeWalt DWP611 dust port?+
Yes. The port is round and our adapter is printed to fit it. The other end matches your shop vac hose.
Does the DWP611 use the same adapter as the DCW600?+
Yes. The corded DWP611 and the cordless DCW600 use the same dust port, so one part covers both routers.
What is the DeWalt DNP615?+
It is DeWalt's own dust collection attachment for the fixed base. Our part is the adapter that joins the router port to a standard shop vac hose, which is the piece most people are missing.
Do you make a dust shoe for a CNC?+
No. A dust shoe is a collar with a brush skirt that wraps the router body, and we do not build that part. We build the port adapter.
Do I need clamps or tape to attach the adapter?+
No. The adapter is a friction fit. You push it into the port and it holds. The vac hose end works the same way.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection Adapters for Festool, DeWalt, and Milwaukee
Drywall dust is fine, fast, and bad for your lungs. The right sander plus the right shop vac plus the adapter that connects them keeps more of it out of the air. This guide covers the Festool Planex, DeWalt DCE800, Milwaukee 2830, and the PETG adapter that joins the hose to your vac.
9 min read
Concrete Grinder With Vacuum Setup: Dust Collection Adapters for Hilti, DeWalt, Bosch, and Metabo
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers the hand-held and floor grinder lineup, the rental hookups, and the PETG adapter that connects any brand to any shop vac.
8 min read
DeWalt DCV517B vs DCV586B: Which Cordless Vac Should You Get?
DeWalt makes two popular cordless shop vacs. They use different hose sizes. Here is which one you need for your tools.
4 min read
Track Saw Dust Collection: DeWalt, Makita, and Festool Guide
Track saws collect dust better than any other circular saw. But the port size and adapter you need depends on the brand. Here is the complete guide.
5 min read