720PRO dust collection adapter and shop vac hose guide
Measure to order
Dust port
Round port, friction
Look at the dust port on your Kreg 720PRO. If it sticks out like a tube, measure the outside. On the 720PRO, if it is a hole, measure the inside. Use calipers.
Get the adapter for this Kreg 720PRO.
Tell us the size you measured at the port and the size you measured at the hose, and we print both ends to those two numbers.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
Kreg 720PRO Pocket-Hole Jig
Specifications
Connect your Kreg 720PRO to your shop vac
Measure the 720PRO port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The Kreg 720PRO is a pocket-hole jig. Pocket-hole drilling makes a huge amount of chips, fast. Every hole sends a fresh pile onto your bench and into the jig. The 720PRO fights back with a dust port, and Kreg includes a vacuum adapter in the box.
The port sits at the rear. We print our adapter to the size you measure there. A GulpDust PETG adapter matches the port on one end and your shop vac hose on the other.
Kreg 720PRO Specs
| Port shape | Round |
|---|---|
| Included part | Kreg vacuum adapter (in the box) |
| Port location | Rear |
| Connection type | Press on |
| Tool type | Pocket-hole jig |
Kreg 720PRO Dust Port: What Connects To It
Kreg includes a vacuum adapter with the 720, which tells you the company expects you to hook up a vac. The port itself sits at the back of the jig.
We print our adapter to your port measurement on one end and to your hose on the other end. It holds with a firm push.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. When the hose does not match the port, chips blow past the joint and pile up anyway. A matched adapter closes that gap.
How to Connect a Shop Vac to the Kreg 720PRO
Wipe the chips out of the port first. A clean port gives the best grip.
Press the tool end of the PETG adapter into the port. We print it to the size you measure, so it presses in and holds. Then press your shop vac hose onto the other end.
Turn the vac on before you drill. Chips get pulled the moment the bit makes them.
Why Pocket-Hole Jigs Need Dust Collection
A pocket-hole bit removes a lot of wood in one short plunge. That is why the chip pile grows so fast.
Loose chips pack into the jig and spill across your bench. Enough buildup and you are stopping to brush out the guide between holes.
A vac on the port pulls chips the moment they form. The jig stays clear, the bench stays clean, and you keep drilling.
Kreg 720PRO Dust Collection FAQ
What size is the dust port on the Kreg 720PRO?+
Measure it with calipers. It is at the rear of the jig. We print the adapter to the size you measure there. You pick the hose end you need.
Does the Kreg 720PRO come with a vacuum adapter?+
Yes. Kreg includes a vacuum adapter with the 720. It still may not match the shop vac hose you own, and that is what our adapter is for.
Will my shop vac hose fit the Kreg 720PRO?+
Probably not by itself. Most shop vac hoses are 1-7/8 inch or 2-1/2 inch, and the jig port may not match either one. A GulpDust adapter grips the port on one end and your hose on the other.
Do I need clamps or tape to attach the adapter?+
Usually not. We print the adapter to the size you measure, so it presses in and holds. You press it onto the port and it holds. The vac hose end works the same way. Add a wrap of tape at any joint that sees heavy use.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
