Makita XTR01Z Compact Router Dust Port Size and Vacuum Adapter Guide
Dust port
We fit it Round port, friction
Our adapter is made for the Makita XTR01Z port. It presses on by hand and holds, so there is nothing to clamp or tape.
Get the adapter for this tool. Printed and shipped from $12.99.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
Makita 18V LXT Brushless Compact Router
Specifications
Connect your Makita XTR01Z to your shop vac
Pick what you are connecting to. Each one is a finished PETG adapter, sized for both ends, printed to order and made in the USA.
Standard hose & duct sizes
Popular vacuums & extractors
Not sure which size?
Full port and fit detail for this tool
The Makita XTR01Z is the Makita 18V LXT Brushless Compact Router. A router throws a heavy pile of chips fast. A vac at the port keeps your cut line clear and the bench tidy.
The router has a round dust port on the side. Our adapter fits it. A GulpDust PETG adapter is sized to the port on one end and your shop vac hose on the other end. No tape. No clamps.
Makita XTR01Z Specs
| Port shape | Round |
|---|---|
| Port location | Side |
| Connection type | Friction fit |
Makita XTR01Z Dust Port: What Fits It
The dust port on the XTR01Z is round and sits on the side of the router. Our adapter is printed to fit it.
A router throws a lot of chips fast. If those chips pile up, they hide your cut line and pack the base. Pulling them at the port keeps the line clear so your edge stays clean.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. They do not seal on this port on their own. A GulpDust adapter is printed to match the router port on one end and your vac hose on the other end.
How to Connect a Shop Vac to the Makita XTR01Z
First, clear any dust out of the port. A clean port gives the best fit.
Press the tool end of the PETG adapter onto the port. It is a friction fit, so it holds with a firm push. Then press your shop vac hose onto the other end of the adapter.
Turn the vac on before you start the cut. Chips build up from the first pass.
Why a Cordless Trim Router Still Needs a Vac
The battery makes the router easy to move, but it does not change how much waste the bit throws.
Chips on the edge hide your line, and the fine part of that dust hangs in the air you breathe. A hose at the port handles both.
Any shop vac with the right adapter does the main job. The fit at the port is what matters most.
Makita XTR01Z Dust Collection FAQ
What size is the dust port on the Makita XTR01Z?+
It is a round port on the side of the router. Our adapter is built to fit it. You pick the hose end you need.
Does the Makita XTR01Z work with a regular shop vac?+
Yes, with the right adapter. A standard shop vac hose is wider than the Makita dust port. The GulpDust PETG adapter is sized to the tool port on one end and to your vac hose on the other.
Do I need clamps or tape to attach the adapter?+
No. The adapter is a friction fit. You push it onto the port and it holds. The same goes for the vac hose end.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Makita XGT 40V Dust Collection: Port Sizes and Best Setup
Makita XGT 40V hand tools use the same dust port as LXT 18V. Here is the complete guide for connecting them to shop vacs and dust extractors.
4 min read
Track Saw Dust Collection: DeWalt, Makita, and Festool Guide
Track saws collect dust better than any other circular saw. But the port size and adapter you need depends on the brand. Here is the complete guide.
5 min read
Milwaukee vs DeWalt vs Makita: Which Brand Has Better Dust Collection?
Port size is the main factor when comparing brands for dust collection. Here is how Milwaukee, DeWalt, and Makita stack up.
5 min read
Cordless Dust Collection: Milwaukee vs DeWalt vs Makita Vacs
All three brands make a cordless shop vac that pairs with their tool system. Here is what each one does well, and when to go cordless vs corded.
6 min read