DCS335B dust collection adapter and shop vac hose guide
Measure to order
Dust port
We fit it
We build the adapter for the DeWalt DCS335B port. Measure across the opening and give us that number, and we print this end to it.
Get the adapter for this tool. Printed and shipped from $12.99.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
DeWalt FLEXVOLT 60V MAX Jig Saw
Specifications
Connect your DeWalt DCS335B to your shop vac
Measure the tool port and the hose or duct you want to connect to. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The DeWalt DCS335B is a FLEXVOLT 60V MAX jig saw. It cuts curves in wood, metal, and plastic, and the blade action throws dust and chips right onto the cut line as you work.
GulpDust does not have a published dust port size on file for this jig saw yet. Jig saws in this class usually vent dust through a small round port near the blade, but the exact size is not something we have measured. Measure your own DCS335B before you order. We print the tool end of your adapter to the number you give us.
DeWalt DCS335B Specs
| Tool type | FLEXVOLT 60V MAX jig saw |
|---|---|
| Dust port on file | None. Measure before ordering. |
DeWalt DCS335B Dust Collection: What We Know and What You Measure
A jig saw blows dust and fine chips out near the blade as it cuts, and on the DCS335B that usually happens through a dust port on the body of the saw. GulpDust has not published a size for that port.
Measure the port opening with calipers, straight across, before you order. Write the number down to the tenth of a millimeter. That is what we cut the tool-side stub to.
Most shop vac hoses run 1-7/8 inch or 2-1/2 inch, both far bigger than a jig saw's dust port. A GulpDust adapter bridges that gap once we have your real measurement.
How to Connect a Shop Vac to the DeWalt DCS335B
Find the dust port on your saw and measure straight across the opening with calipers.
Use the GulpDust builder to give us that number along with your shop vac or dust extractor hose size. We print a PETG adapter between the two.
Press the adapter onto the port and your hose onto the other end. Run the vac while you cut so the line stays clear.
Why a Jig Saw Needs Good Dust Collection
A jig saw blade throws dust straight up onto the line you are trying to follow, so you end up stopping to blow the dust away every few seconds without a hookup.
A running vac clears the cut line as the blade moves, so curves come out smoother because you can actually see where the blade is going.
It also keeps fine dust out of the air in a small shop, where it can hang around long after the cut is done.
DeWalt DCS335B Dust Collection FAQ
Does GulpDust have the dust port size for the DeWalt DCS335B?+
Not yet. We do not have a size on file for this saw. Measure the port yourself and give us that number in the builder.
Can GulpDust still build an adapter for this jig saw?+
Yes. Use the GulpDust builder custom path. Give us the port measurement and your hose or vac size, and we print a PETG adapter between the two.
Where is the dust port on the DCS335B?+
Jig saws in this class usually vent dust through a small port near the blade housing. Check your own saw to confirm the location before you measure.
What if I measure it wrong?+
Measure twice with calipers before you order, straight across the opening. If a part does not seat once it arrives, contact us and we will work it out.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection Adapters for Festool, DeWalt, and Milwaukee
Drywall dust is fine, fast, and bad for your lungs. The right sander plus the right shop vac plus the adapter that connects them keeps more of it out of the air. This guide covers the Festool Planex, DeWalt DCE800, Milwaukee 2830, and the PETG adapter that joins the hose to your vac.
9 min read
Concrete Grinder With Vacuum Setup: Dust Collection Adapters for Hilti, DeWalt, Bosch, and Metabo
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers the hand-held and floor grinder lineup, the rental hookups, and the PETG adapter that connects any brand to any shop vac.
8 min read
DeWalt DCV517B vs DCV586B: Which Cordless Vac Should You Get?
DeWalt makes two popular cordless shop vacs. They use different hose sizes. Here is which one you need for your tools.
4 min read
Track Saw Dust Collection: DeWalt, Makita, and Festool Guide
Track saws collect dust better than any other circular saw. But the port size and adapter you need depends on the brand. Here is the complete guide.
5 min read