DWS713 dust collection adapter and shop vac hose guide
Measure to order
Dust port
Round port, friction
Look at the dust port on your DeWalt DWS713. If it sticks out like a tube, measure the outside. On the DWS713, if it is a hole, measure the inside. Use calipers.
Get the adapter for this tool. Printed to order from $12.99, plus $7.95 shipping.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
DeWalt 10 in. Single Bevel Compound Miter Saw
Specifications
Connect your DeWalt DWS713 to your shop vac
Measure the DWS713 port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The DeWalt DWS713 is a 10 inch single bevel compound miter saw. It is light for a miter saw, so it is easy to move from job to job. Every cut throws chips and fine dust off the back of the saw.
The saw has a dust port on the rear. We print the PETG adapter to the size you measure there. One end grips the saw. The other end takes your shop vac hose.
DeWalt DWS713 Specs
| Port shape | Round |
|---|---|
| Port location | Rear |
| Connection type | Press on |
| Blade size | 10 in. |
| Max speed | 5,000 RPM |
| Weight | 24.3 lbs |
DeWalt DWS713 Dust Port: What Connects To It
The dust port on the DWS713 sits on the rear of the saw. We print the adapter to the size you measure there.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. Neither one fits this port on its own. The small dust bag that comes with the saw catches very little, so most chips end up on the floor.
A GulpDust adapter is printed to match the saw port on one end and your vac hose on the other end. Pick your hose and we make the part to match.
How to Connect a Shop Vac to the DeWalt DWS713 Miter Saw
First, pull the dust bag off and look at the port on the rear of the saw. Wipe out any sawdust so the adapter seats clean.
Press the tool end of the PETG adapter into the port. We print it to the size you measure, so it holds with a firm push. Then press your shop vac hose onto the other end.
Turn the vac on before you cut. Let it run for a second after each cut so the hose clears. This setup catches most of the dust at the saw instead of on your bench.
Best Vacuum and Cyclone Setup for the DeWalt DWS713
A miter saw throws big chips fast. A plain shop vac fills up quick and the filter clogs.
Add a cyclone separator between the saw and the vac. The separator drops the heavy chips into a bucket so your vac filter stays clean and your suction stays strong.
Keep the hose short and straight when you can. Long, kinked hoses cut your suction and let dust settle inside.
DeWalt DWS713 Dust Collection FAQ
Will a GulpDust adapter fit the DeWalt DWS713 dust port?+
Yes. The port sits on the rear of the saw. We print the adapter to the size you measure there, and the other end matches your shop vac hose.
Does the DeWalt DWS713 work with a regular shop vac?+
Yes, with the right adapter. A standard shop vac hose does not match this port. We print the GulpDust PETG adapter to your saw port measurement on one end and to your vac hose size on the other.
Do I need clamps or tape to attach the adapter?+
Usually not. We print the adapter to the size you measure, so you push it into the port and it holds. The same goes for the vac hose end. Add a wrap of tape at any joint that sees heavy use.
Is the small dust bag enough on the DWS713?+
No. The bag catches very little. A shop vac on the port catches far more of the chips and fine dust, which keeps your shop and lungs cleaner.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Does the same adapter fit other DeWalt miter saws?+
Not always. Ports can differ between miter saw models, so measure the port on yours. The builder prints the adapter to the number you enter.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection and Hose Connections
Drywall dust is fine, fast, and bad for your lungs. A pole sander, a HEPA shop vac, and a snug hose connection keep more of it out of the air. This guide covers how to pick a setup, how to measure your sander port and hose, and the PETG adapter that joins the two.
9 min read
Concrete Grinder With Vacuum Setup: Dust Collection and Hose Connections
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers hand-held and floor grinders, rental hookups, and how to measure for the PETG adapter that connects your shroud to your shop vac.
8 min read
DeWalt DCV517B vs DCV586B: Which Cordless Vac Should You Get?
DeWalt makes two popular cordless shop vacs. Here is how they compare, and what to measure before you connect your tools.
4 min read
Track Saw Dust Collection: Connect Yours to a Shop Vac or Extractor
Track saws collect dust better than any other circular saw. Port styles change between brands and models, so measure yours. Here is how to connect it.
5 min read
