DeWalt DCS570B 20V MAX 7-1/4 Inch Circular Saw Dust Port Adapter Guide
Dust port
We fit it
Our adapter is made for the DeWalt DCS570B port. It presses on by hand and holds, so there is nothing to clamp or tape.
Get the adapter for this tool. Printed and shipped from $12.99.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
DeWalt 20V MAX 7-1/4" Circular Saw
Specifications
Connect your DeWalt DCS570B to your shop vac
Pick what you are connecting to. Each one is a finished PETG adapter, sized for both ends, printed to order and made in the USA.
Standard hose & duct sizes
Popular vacuums & extractors
Not sure which size?
Full port and fit detail for this tool
The DeWalt DCS570B is the 20V MAX 7-1/4 inch circular saw. It runs on the 20V MAX battery and has the power of a corded saw. A full-size blade like this throws a lot of chips and sawdust.
The saw has a dust port on the rear, and it is a proprietary shape. It uses the DeWalt DWE575DC dust chute, not a clean round port. Our PETG adapter is made to fit it. One end grips the saw. The other end takes your shop vac hose. No tape. No clamps.
DeWalt DCS570B Specs
| Port shape | Proprietary |
|---|---|
| Port location | Rear |
| Connection type | Friction fit |
| Blade size | 7-1/4 in. |
| Max speed | 5,200 RPM |
| Weight | 8.8 lbs |
DeWalt DCS570B Dust Port: What Fits It
The dust port on the DCS570B is a proprietary shape, not a clean round port. It uses the DeWalt DWE575DC dust chute. Our adapter is made to fit it.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. Neither one fits this chute on its own. That gap is why dust blows past the hose and into the air.
A GulpDust adapter is printed to match the saw port on one end and your vac hose on the other end. Pick your hose and we make the part to match.
How to Connect a Shop Vac to the DeWalt 20V MAX 7-1/4 Inch Circular Saw
First, look at the rear port on the saw. Wipe out any sawdust so the adapter seats clean.
Press the tool end of the PETG adapter onto the port. It is a friction fit, so it holds with a firm push. Then press your shop vac hose onto the other end.
Turn the vac on before you cut. Let it run for a second after each cut so the hose clears. This setup catches most of the dust at the blade instead of on the floor.
Best Vacuum and Dust Extractor Setup for the DeWalt DCS570B
A 7-1/4 inch saw cuts a lot, so it makes a lot of chips. Pair it with a strong shop vac that can move plenty of air.
If you cut a lot, add a cyclone separator between the saw and the vac. The separator drops the heavy chips into a bucket so your vac filter stays clean longer.
Keep the hose short and straight when you can. Long, kinked hoses cut your suction and let chips settle inside.
DeWalt DCS570B Dust Collection FAQ
Will a GulpDust adapter fit the DeWalt DCS570B dust port?+
Yes. The saw uses the proprietary DWE575DC dust chute at the rear, and our adapter is printed to fit it. The other end matches your shop vac hose.
Does the DeWalt DCS570B work with a regular shop vac?+
Yes, with the right adapter. A standard shop vac hose does not fit this proprietary chute. The GulpDust PETG adapter fits the saw port on one end and your vac hose on the other.
Do I need clamps or tape to attach the adapter?+
No. The adapter is a friction fit. You push it into the port and it holds. The same goes for the vac hose end.
Will dust collection slow down the saw?+
No. The adapter only routes the chips the saw already makes. It does not touch the blade or the motor. The saw still spins at 5,200 RPM.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Does the same adapter fit other DeWalt 20V MAX tools?+
Not always. DeWalt 20V MAX tools use different ports. This saw uses a proprietary dust chute, and other tools use their own shapes. Each tool page has the adapter made for that tool.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection Adapters for Festool, DeWalt, and Milwaukee
Drywall dust is fine, fast, and bad for your lungs. The right sander plus the right shop vac plus the adapter that connects them keeps more of it out of the air. This guide covers the Festool Planex, DeWalt DCE800, Milwaukee 2830, and the PETG adapter that joins the hose to your vac.
9 min read
Concrete Grinder With Vacuum Setup: Dust Collection Adapters for Hilti, DeWalt, Bosch, and Metabo
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers the hand-held and floor grinder lineup, the rental hookups, and the PETG adapter that connects any brand to any shop vac.
8 min read
DeWalt DCV517B vs DCV586B: Which Cordless Vac Should You Get?
DeWalt makes two popular cordless shop vacs. They use different hose sizes. Here is which one you need for your tools.
4 min read
Track Saw Dust Collection: DeWalt, Makita, and Festool Guide
Track saws collect dust better than any other circular saw. But the port size and adapter you need depends on the brand. Here is the complete guide.
5 min read