XOB01Z dust collection adapter and shop vac hose guide
Measure to order
Dust port
Round port, friction
Look at the dust port on your Makita XOB01Z. If it sticks out like a tube, measure the outside. On the XOB01Z, if it is a hole, measure the inside. Use calipers.
Get the adapter for this tool. Printed to order from $11.99, plus $7.95 shipping.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
Makita 18V LXT 5 in. Random Orbit Sander
Specifications
Connect your Makita XOB01Z to your shop vac
Measure the XOB01Z port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The Makita XOB01Z is the 18V LXT 5 inch random orbit sander. It runs on the LXT battery and gives a smooth finish on wood. Like all sanders, it makes very fine dust that hangs in the air.
The sander has a dust port on the side. We print our adapter to the size you measure there. A GulpDust PETG adapter pushes into that port and lets you hook up a shop vac or dust extractor.
Makita XOB01Z Specs
| Port shape | Round |
|---|---|
| Port location | Side |
| Connection type | Press on |
| Pad size | 5 in. |
| Max speed | 11,000 RPM |
| Weight | 3.3 lbs |
Makita XOB01Z Dust Port: What Connects To It
The dust port on the XOB01Z sits on the side of the tool. Our adapter pushes into it.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. Neither one seals on this port by itself. That gap is why fine dust blows past the hose and into the air.
A GulpDust adapter matches the sander port on one end and your vac hose on the other end, so you get a clean fit.
How to Connect a Shop Vac to the Makita XOB01Z Sander
Clear any dust out of the side port first. A clean port gives the best fit.
Push the tool end of the PETG adapter into the port. We print it to the size you measure, so it holds with a firm push. Then press your shop vac hose onto the other end of the adapter.
Turn the vac on before you start sanding. Dust collection on a sander is not just about a clean bench. Fine sanding dust is the kind that hangs in the air and gets into your lungs.
Why Dust Collection Matters on a Random Orbit Sander
A random orbit sander makes very fine dust. That dust floats. It does not fall to the floor like saw chips do.
Pulling that dust at the port keeps more of it out of the air. It also keeps the pad clean, which helps your sandpaper last longer and cut better.
For the smoothest finish, run a steady vac while you sand. A variable speed extractor is nice, but any shop vac with the right adapter does the main job.
Makita XOB01Z Dust Collection FAQ
What size is the dust port on the Makita XOB01Z?+
Measure it with calipers. It is on the side of the sander. We print the adapter to the size you measure there. You pick the hose end you need.
Does the Makita XOB01Z work with a regular shop vac?+
Yes, with an adapter. A shop vac hose and a tool port rarely match, so measure both. The GulpDust PETG adapter is sized to the sander port on one end and to your vac hose on the other.
Do I need clamps to attach the adapter?+
Usually not. We print the adapter to the size you measure, so you push it into the port and it holds. The vac hose end works the same way. Add a wrap of tape at any joint that sees heavy use.
Why does the XOB01Z need dust collection so much?+
Sanders make very fine dust that floats in the air. That dust is the kind that is bad to breathe. Pulling it at the port keeps more of it out of the air and helps the sandpaper last longer.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Does the same adapter fit other Makita 18V LXT tools?+
Not always. Ports can differ between Makita tools, so measure the port on yours. The builder prints the adapter to the number you enter.
Related Guides
Makita XGT 40V Dust Collection: How to Measure and Connect Your Tool
Dust ports can differ between Makita XGT and LXT tools. Here is how to measure your tool and your hose, and how to connect to a shop vac or dust extractor.
4 min read
Track Saw Dust Collection: Connect Yours to a Shop Vac or Extractor
Track saws collect dust better than any other circular saw. Port styles change between brands and models, so measure yours. Here is how to connect it.
5 min read
Milwaukee vs DeWalt vs Makita: Comparing Dust Collection
A brand name does not tell you your port size. Here is what to compare when you pick a cordless platform for dust collection, and how to connect whichever you own.
5 min read
Cordless Dust Collection: Milwaukee vs DeWalt vs Makita Vacs
Milwaukee, DeWalt, and Makita all make a cordless shop vac. Here is what each one does well, and when to go cordless vs corded.
6 min read
