2732-20 dust collection adapter and shop vac hose guide
Measure to order
Dust port
Look at the dust port on your Milwaukee 2732-20. If it sticks out like a tube, measure the outside. On the 2732-20, if it is a hole, measure the inside. Use calipers.
Get the adapter for this tool. Printed to order from $12.99, plus $7.95 shipping.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
Milwaukee M18 FUEL 7-1/4" Circular Saw
Specifications
Connect your Milwaukee 2732-20 to your shop vac
Measure the 2732-20 port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The Milwaukee 2732-20 is an M18 FUEL 7-1/4" cordless circular saw. It cuts fast through framing lumber and sheet goods, and the blade throws a steady line of dust and chips out the rear of the saw as it cuts.
Measure the dust port at the rear of your own 2732-20 before you order. We print the tool end of your adapter to the number you give us, not to a number pulled from somewhere else.
Milwaukee 2732-20 Specs
| Tool type | M18 FUEL cordless circular saw |
|---|---|
| Port location | Rear |
| Dust port dimension in this module | None. Measure before ordering. |
Milwaukee 2732-20 Dust Collection: What We Know and What You Measure
The 2732-20 vents dust and chips out a port at the rear of the saw, behind the blade guard. This module does not print a size for that port.
Measure the port opening with calipers, straight across, before you order. Write the number down to the tenth of a millimeter. That is what we cut the tool-side stub to.
Most shop vac hoses run 1-7/8 inch or 2-1/2 inch, and neither one seals on the saw's rear dust port by itself. A GulpDust adapter bridges that gap once we have your real measurement.
How to Connect a Shop Vac to the Milwaukee 2732-20
Find the dust port at the rear of the saw and measure it with calipers. If it sticks out like a tube, measure across the outside. If it is a hole, measure across the inside.
Use the GulpDust builder to give us that number along with your shop vac or dust extractor hose size. We print a PETG adapter between the two.
Press the adapter onto the port and your hose onto the other end. Run the vac while you cut so the line stays clear.
Why a Circular Saw Needs Good Dust Collection
A circular saw throws a steady fan of chips and fine dust along the cut line with every pass, and most of it lands on the workpiece and floor without a hookup.
Pulling dust at the port keeps the cut line visible, which makes it easier to follow a layout line on long rips and crosscuts.
It also keeps fine dust out of the air in a closed shop, which matters more the longer a cutting job runs.
Milwaukee 2732-20 Dust Collection FAQ
What dust port size should I use for the Milwaukee 2732-20?+
Measure it yourself. Put calipers on the rear port. If it sticks out like a tube, measure across the outside. If it is a hole, measure across the inside. Enter that number in the builder.
Can GulpDust still build an adapter for this saw?+
Yes. Use the GulpDust builder custom path. Give us the port measurement and your hose or vac size, and we print a PETG adapter between the two.
Where is the dust port on the Milwaukee 2732-20?+
It is at the rear of the saw, behind the blade guard, where the dust chute exits. That is where you measure and where the adapter connects.
What if I measure it wrong?+
Measure twice with calipers before you order: across the outside if it sticks out like a tube, across the inside if it is a hole. If a part does not seat once it arrives, contact us and we will work it out.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection and Hose Connections
Drywall dust is fine, fast, and bad for your lungs. A pole sander, a HEPA shop vac, and a snug hose connection keep more of it out of the air. This guide covers how to pick a setup, how to measure your sander port and hose, and the PETG adapter that joins the two.
9 min read
Milwaukee PACKOUT and M18 FUEL Dust Collection: Cordless Vac Guide
Milwaukee sells M18 FUEL cordless vacs, including one built for the PACKOUT system. Here is how they work with your tools, and how to measure for a snug connection.
5 min read
Milwaukee vs DeWalt vs Makita: Comparing Dust Collection
A brand name does not tell you your port size. Here is what to compare when you pick a cordless platform for dust collection, and how to connect whichever you own.
5 min read
Cordless Dust Collection: Milwaukee vs DeWalt vs Makita Vacs
Milwaukee, DeWalt, and Makita all make a cordless shop vac. Here is what each one does well, and when to go cordless vs corded.
6 min read
