2737-20 dust collection adapter and shop vac hose guide
Measure to order
Dust port
This tool uses a shaped nozzle, not a plain round port. Send us the shape and we will tell you if we can make it.
Send us the shape →Milwaukee M18 FUEL D-Handle Jig Saw
Specifications
Connect your Milwaukee 2737-20 to your shop vac
This tool uses a shaped nozzle, not a plain round port. Send us the shape and we will tell you if we can make it.
Popular starting points
Full port and fit detail for this tool
The Milwaukee 2737-20 is the Milwaukee M18 FUEL D-Handle Jig Saw. A jig saw throws fine dust right onto the cut line as the blade pumps up and down.
The saw uses a dust shroud built into the tool. Send us the shape and we will tell you if we can make it.
Milwaukee 2737-20 Specs
| Port shape | Proprietary |
|---|---|
| Port location | Side |
| Connection type | Press on |
Milwaukee 2737-20 Dust Shroud: What Connects To It
Measure it before you order.
Dust pickup matters on a jig saw because the dust lands right on your line. When the line is covered, you cannot follow the curve and the cut drifts. A vac at the shroud pulls that dust away so the line stays clear.
Send us the shape and we will tell you if we can make it.
How to Connect a Shop Vac to the Milwaukee 2737-20
First, clear any dust out of the shroud. A clean port gives the best fit.
If we can make an adapter for this tool, press the tool end onto the shroud. Then press your shop vac hose onto the other end.
Turn the vac on before you start the cut. Dust builds on the line from the first stroke of the blade.
Why a D-Handle Jig Saw Needs a Vac
On a D-handle saw your hand sits on top, and your eyes sit right over the blade. So does the dust.
Pulling the dust at the shroud keeps the line clear and keeps more of it out of the air you breathe.
Any shop vac with the right adapter does the main job. The fit at the shroud is what matters most.
Milwaukee 2737-20 Dust Collection FAQ
What size is the dust port on the Milwaukee 2737-20?+
Measure the dust opening on your saw. Send us the shape and we will tell you if we can make it.
Does the Milwaukee 2737-20 work with a regular shop vac?+
Maybe. A standard shop vac hose does not fit this shaped port on its own. Send us the shape on the custom request form and we will tell you if we can make an adapter for it.
Do I need clamps or tape to attach the adapter?+
Maybe. Whether it holds depends on the shape. Send us the shape on the custom request form and we will tell you if we can make it.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection and Hose Connections
Drywall dust is fine, fast, and bad for your lungs. A pole sander, a HEPA shop vac, and a snug hose connection keep more of it out of the air. This guide covers how to pick a setup, how to measure your sander port and hose, and the PETG adapter that joins the two.
9 min read
Milwaukee PACKOUT and M18 FUEL Dust Collection: Cordless Vac Guide
Milwaukee sells M18 FUEL cordless vacs, including one built for the PACKOUT system. Here is how they work with your tools, and how to measure for a snug connection.
5 min read
Milwaukee vs DeWalt vs Makita: Comparing Dust Collection
A brand name does not tell you your port size. Here is what to compare when you pick a cordless platform for dust collection, and how to connect whichever you own.
5 min read
Cordless Dust Collection: Milwaukee vs DeWalt vs Makita Vacs
Milwaukee, DeWalt, and Makita all make a cordless shop vac. Here is what each one does well, and when to go cordless vs corded.
6 min read
