Craftsman CMXXSAX69434605 Belt Sander Dust Port Size and Shop Vac Adapter
Get the adapter for this tool. Printed from $18.99 or STL download from $7.60.
- Made in the USA
- PETG, tougher than PLA
- Friction fit, no clamps or tape
- Free reprint on any print defect
Craftsman 4 in. x 36 in. Benchtop Belt Sander
Specifications
Connect your Craftsman CMXXSAX69434605 to your shop vac
Pick what you are connecting to. Each one is a finished PETG adapter, sized for both ends. Print it yourself or have it shipped, made in the USA.
Standard hose & duct sizes
Popular vacuums & extractors
Not sure which size? Walk through the configurator or measure your port.
Craftsman CMXXSAX69434605 Belt Sander Dust Port Size and Shop Vac Adapter
The Craftsman CMXXSAX69434605 is a 4 in. x 36 in. benchtop belt sander. A benchtop sander makes a steady stream of fine dust, and all of it lands on your bench or floats into your shop air.
The store listing states a standard 2-1/2 in. (63.5 mm) dust port. That is a stated size, not one we measured, so check your own port before you buy. A GulpDust PETG adapter matches the port on one end and your shop vac hose on the other. No tape. No clamps.
Craftsman CMXXSAX69434605 Dust Port and Specs
Port size: please measure to confirm
Source verified, but only one side of the port was confirmed. Measure your port before you buy.
Source we cite: www.lowes.com
| Dust port inner diameter | 63.5mm (2-1/2 in., measure to confirm) |
|---|---|
| Port shape | Round |
| Port location | Rear |
| Connection type | Friction fit |
| Belt size | 4 in. x 36 in. |
Craftsman CMXXSAX69434605 Dust Port Size: 2-1/2 in. (63.5 mm) Stated
The Lowe's listing states this sander has a standard 2-1/2 in. (63.5 mm) dust port. That is the size class most full size shop vacs use. It is also a stated size, not a measured one, so treat it as a close guide and measure your own port before you order.
The bigger Craftsman benchtop sander, the 6 in. x 48 in. model, lists the same port. If you own both machines, one hose setup can serve the pair. Measure each port to be sure.
Even inside the 2-1/2 in. class, hose cuffs vary by brand. If your hose wiggles on the port or will not seat, a GulpDust adapter printed for your exact port and hose seals the joint.
How to Connect a Shop Vac to the Craftsman Benchtop Belt Sander
Unplug the sander first. Then wipe the dust off the rear port so the adapter can seat clean.
Press the PETG adapter into the port. It is a friction fit, so a firm push is all it takes. Then press your shop vac hose onto the other end.
Turn the vac on before the belt touches wood. A belt sander throws dust from the first second, so the vac needs to be pulling right away.
Why Benchtop Sanders Need Dust Collection
A belt sander grinds wood into very fine dust. That dust does not fall like saw chips. It floats, and it is the kind of dust that is bad to breathe.
Dust that stays on the belt also clogs the grit. Pulling it away at the port helps the belt cut better and last longer.
A sealed hookup at the rear port sends the dust into the vac instead of into the air. Any shop vac with the right adapter does the main job.
Craftsman CMXXSAX69434605 Dust Collection FAQ
What size is the dust port on the Craftsman CMXXSAX69434605?+
The listing states a standard 2-1/2 in. (63.5 mm) dust port. That is a stated size, not a measured one, so measure your own port with calipers before you buy.
Does the 6 in. x 48 in. Craftsman sander use the same port?+
Yes, per the listings. The bigger benchtop model lists the same 2-1/2 in. port. Measure each machine before you order, since stated sizes can drift.
Does this sander work with a regular shop vac?+
Yes. The port is in the 2-1/2 in. class most shop vacs use. Hose cuffs still vary by brand, so if your hose sits loose, a printed adapter seals the joint.
Do I need clamps to attach the adapter?+
No. The adapter is a friction fit. You press it in and it holds. The vac hose end works the same way.
Can I print this adapter myself?+
Yes. You can buy the printed PETG part shipped from the US, or download the STL file and print it at home. We suggest PETG with 3 walls and 25 percent infill.