DW735 dust collection adapter and shop vac hose guide
Measure to order
Dust port
Round port, friction
Look at the dust port on your DeWalt DW735. If it sticks out like a tube, measure the outside. On the DW735, if it is a hole, measure the inside. Use calipers.
Get the adapter for this DeWalt DW735.
Tell us the size you measured at the port and the size you measured at the hose, and we print both ends to those two numbers.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
DeWalt DW735 13 in. Thickness Planer
Specifications
Connect your DeWalt DW735 to your shop vac
Measure the DW735 port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The DeWalt DW735 is the 13 inch benchtop thickness planer. It has a fan in it that blows chips out the top, and it makes more waste per minute than any other tool most people own. One pass on a wide board fills a bucket.
The planer sends those chips out through a hood. Our PETG adapter joins the hood to the hose you already run, so the chips end up in the collector instead of on the ceiling and the floor.
DeWalt DW735 Specs
| Port shape | Round hood outlet |
|---|---|
| Connection type | Press on |
| Planing width | 13 in. |
What Connects To the DeWalt DW735 Dust Hood
The hood is the outlet the chips leave through. That is the side we fit, and our adapter is made for it.
The heading says hood on purpose. Read the next section before you buy anything, because the machine has another opening and it is a different shape.
Our adapter grips the hood on one end and your hose on the other end. It presses on by hand.
DW735 Dust Collection: Hood Side and Tool Side
This planer has two sides to the dust path and people mix them up constantly.
A hose hooks to it and a printed adapter hooks to it, and that is what we sell.
DeWalt sells its own adapter for that opening. We do not make a replacement for that side, and nothing we sell goes there.
So the rule is simple. Fit the hood, run the hose off the hood, and leave the machine outlet alone.
Moving Off the DW735 Dust Bag
A bag on a planer is a losing game. This machine blows chips hard, and the bag balloons, packs, and then lets the fine dust straight through the cloth.
A dust collector is the right partner here. It moves the volume of air a planer needs, and it will not clog on a pile of shavings.
A shop vac works if that is what you have, but empty it often and expect to. Read the next section for why.
Either way, run it the whole time you plane. Chips left inside the machine press into the board on the next pass and dent it.
DW735 and DW735X
The DW735X is the same planer with a stand, infeed and outfeed tables, and an extra set of knives in the box.
Port sizes can change between models. Measure the port on the tool you own.
DeWalt DW735 Dust Collection FAQ
Will a GulpDust adapter fit the DeWalt DW735 dust hood?+
Yes. We print the adapter to the size you measure at the hood outlet. The other end matches the hose on your dust collector or shop vac.
Does the same part fit the DW735X?+
Maybe. Port sizes can change between models. Measure the port on your tool and give us that number.
Do you make a replacement dust port for the machine itself?+
No. We do not make a replacement outlet for the machine. We print the part to the size you measure at the hood.
Shop vac or dust collector on a DW735?+
A dust collector, if you have one. A planer throws a huge volume of shavings and a collector moves the air to keep up. A shop vac works, but you will empty it a lot.
Do I need clamps or tape to attach the adapter?+
Usually not. We print the adapter to the size you measure, so it presses in and holds. You push it on and it holds. Add a wrap of tape at any joint that sees heavy use.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Drywall Sander With Vacuum Setup: Pole Sander Dust Collection and Hose Connections
Drywall dust is fine, fast, and bad for your lungs. A pole sander, a HEPA shop vac, and a snug hose connection keep more of it out of the air. This guide covers how to pick a setup, how to measure your sander port and hose, and the PETG adapter that joins the two.
9 min read
Concrete Grinder With Vacuum Setup: Dust Collection and Hose Connections
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers hand-held and floor grinders, rental hookups, and how to measure for the PETG adapter that connects your shroud to your shop vac.
8 min read
DeWalt DCV517B vs DCV586B: Which Cordless Vac Should You Get?
DeWalt makes two popular cordless shop vacs. Here is how they compare, and what to measure before you connect your tools.
4 min read
Track Saw Dust Collection: Connect Yours to a Shop Vac or Extractor
Track saws collect dust better than any other circular saw. Port styles change between brands and models, so measure yours. Here is how to connect it.
5 min read
