ERB690 dust collection adapter and shop vac hose guide
Measure to order
Dust port
Look at the dust port on your Erbauer ERB690. If it sticks out like a tube, measure the outside. On the ERB690, if it is a hole, measure the inside. Use calipers.
More on this port size →Get the adapter for this tool. Printed to order from $12.99, plus $7.95 shipping.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
Erbauer ERB690 Plunge Track Saw
Specifications
Connect your Erbauer ERB690 to your shop vac
Measure the ERB690 port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The Erbauer ERB690 is a plunge cut track saw. It cuts clean, straight lines on sheet goods and boards. A track saw throws fine dust right at the cut line, so a good dust hookup keeps your view clear and the air clean.
The saw has a dust extraction port at the rear. A GulpDust PETG adapter plugs into that port and steps it to any standard shop vac hose.
Erbauer ERB690 Specs
| Port location | Rear |
|---|---|
| Connection type | Press on |
| Saw type | Plunge cut track saw |
Erbauer ERB690 Dust Port: What Connects To It
The dust extraction port on the ERB690 sits at the rear of the saw. We print the adapter to the size you measure there.
A standard shop vac hose will not seal on it. A 1-7/8 in. or 2-1/2 in. hose end rarely seals on a track saw port by itself.
A GulpDust adapter is printed to the size you measure at the saw port on one end and your vac hose on the other end. Pick your hose and we print the part to match.
How to Connect a Shop Vac to the Erbauer ERB690
Clear any dust out of the rear port first. A clean port gives the best grip.
Push the tool end of the PETG adapter into the port. We print it to the size you measure, so it holds with a firm press. Then press your shop vac or extractor hose onto the other end.
Turn the vac on before you plunge. Running the vac while you cut catches the dust at the source and keeps the track and your line clear.
Why Track Saws Need Good Dust Collection
A track saw cuts a fine kerf and sprays dust straight up out of the guard. Without a hose, that dust lands on the track and the workpiece and hangs in the air.
Pulling the dust at the port keeps the cut line visible, so the track stays put and the cut stays true. It also keeps more fine dust out of the air you breathe.
For the cleanest cut, fit the adapter to the port and run a steady vac. Any shop vac with the right adapter does the main job.
Erbauer ERB690 Dust Collection FAQ
Will a GulpDust adapter fit the Erbauer ERB690 dust port?+
Yes. The port sits at the rear of the saw. We print the adapter to the size you measure there, and the other end matches your shop vac hose.
Does the Erbauer ERB690 work with a regular shop vac?+
Yes, with an adapter. Most shop vac hoses are 1-7/8 inch or 2-1/2 inch, so measure the port on your tool and the hose end on your vac. We print the GulpDust PETG adapter to your saw port measurement on one end and to your vac hose size on the other.
Can I use one adapter on other track saws?+
Maybe. Port sizes can change between models. Measure the port on your tool and give us that number.
Do I need clamps to attach the adapter?+
Usually not. We print the adapter to the size you measure, so you press it into the port and it holds. The vac hose end works the same way. Add a wrap of tape at any joint that sees heavy use.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
