Fein MultiMaster Oscillating Tool Dust Port Adapter and Vac Guide
Dust port
We fit it Round port, friction
Our adapter is made for the Fein MultiMaster port. It presses on by hand and holds, so there is nothing to clamp or tape.
Other tools that take the same adapter →Get the adapter for this tool. Printed and shipped from $12.99.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
Fein MultiMaster Oscillating Multi-Tool
Specifications
Connect your Fein MultiMaster to your shop vac
Pick what you are connecting to. Each one is a finished PETG adapter, sized for both ends, printed to order and made in the USA.
Standard hose & duct sizes
Popular vacuums & extractors
Not sure which size?
Full port and fit detail for this tool
The Fein MultiMaster is an oscillating multi-tool. It sands into corners, cuts flush, and grinds in spots no other tool reaches. That work happens close to your face, and it makes very fine dust.
Straight talk first: the MultiMaster itself has no dust port. Fein sells a dust extraction set, part 92602102000, that clamps onto the tool. Our PETG adapter is made to fit that set's hose connection and step it to any standard shop vac hose.
Fein MultiMaster Specs
| Native port on the tool | None |
|---|---|
| Fein dust extraction set | Part 92602102000 |
| Port shape | Round |
| Port location | Rear |
| Connection type | Friction fit |
Fein MultiMaster Dust Port: The Fein Extraction Set Is the Port
Check the back of a bare MultiMaster and you will not find a dust port. Fein handles extraction with a separate part, the dust extraction set, part number 92602102000. It clamps onto the tool.
That set has a hose connection on it. A GulpDust adapter mates it, one end on the set connection and the other end on your shop vac hose.
Get the Fein set on the tool first, then the adapter carries it to whatever vac you already own.
How to Connect a Shop Vac to the Fein MultiMaster
Fit the Fein extraction set to the tool first. Without the set there is nothing for a hose to grab.
Press the tool end of the PETG adapter onto the set's connection. It is a friction fit, so it holds with a firm press. Then press your shop vac hose onto the other end.
Turn the vac on before the tool touches wood. Fine dust gets pulled the moment it forms.
Why Oscillating Tools Need Dust Collection
An oscillating tool works in corners, under trim, and inside cabinets. Your face is usually right above the cut.
The dust it makes is fine. It hangs in the air long after the cut, and it coats everything in the room.
Capture at the source fixes it. The set on the tool, the adapter on the set, and a steady vac pull the dust before it reaches you.
Fein MultiMaster Dust Collection FAQ
Does the Fein MultiMaster have a dust port?+
No. The tool itself has no native port. Fein's dust extraction set, part 92602102000, clamps onto the tool and adds the hose connection.
Will a GulpDust adapter fit the Fein extraction set?+
Yes. Our adapter is made to fit the set's hose connection on one end and your shop vac hose on the other.
Will a regular shop vac work with the MultiMaster?+
Yes, once the Fein extraction set is on the tool. Most shop vac hoses are 1-7/8 inch or 2-1/2 inch, so they need a step down to the set connection. That step is the GulpDust adapter.
Which Fein part do I need before ordering an adapter?+
The Fein dust extraction set, part number 92602102000. It is the part that clamps onto the MultiMaster and gives it a port. Our adapter mates its connection to your hose.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.