HB6319 dust collection adapter and shop vac hose guide
Measure to order
Dust port
Round port, friction
Look at the dust port on your WEN HB6319. If it sticks out like a tube, measure the outside. On the HB6319, if it is a hole, measure the inside. Use calipers.
Published size
WEN lists the dust port as 1-7/16 in outer diameter, 1-1/4 in inner diameter. (WEN manual, checked Oct 10, 2026)
Your port can differ. Measure yours and use that number.
Get the adapter for this WEN HB6319.
Tell us the size you measured at the port and the size you measured at the hose, and we print both ends to those two numbers.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onPrinted to your two sizes
- Print defectPhoto within 30 days, reprint or refund
WEN HB6319 6.3-Amp 3 x 18 in. Belt Sander
Specifications
Connect your WEN HB6319 to your shop vac
Measure the HB6319 port and the hose or duct you want on it. We print the adapter between those two numbers. Made in the USA.
Build an adapter for this toolPopular starting points
Full port and fit detail for this tool
The WEN HB6319 is a 6.3 amp, 3 x 18 in. belt sander. It is a compact, low-cost sander, but it makes dust like a big one. The included cloth bag catches chips and lets the fine dust blow through. Hooking a shop vac to the port grabs the dust at the source, so it goes into the vac instead of into your air.
The onboard port takes either the bag or a hose. We print a GulpDust PETG adapter to your port measurement on one end and to your shop vac hose on the other, so the hose holds instead of falling off.
WEN HB6319 Specs
| Port shape | Round |
|---|---|
| Connection type | Press on |
| Belt size | 3 in. x 18 in. |
| Motor | 6.3 amp |
WEN HB6319 Dust Port: What Connects To It
The onboard dust port on the HB6319 takes the included dust bag or a hose. We print the PETG adapter to the size you measure there.
Most shop vac hoses are 1-7/8 in. or 2-1/2 in. Neither one seals on a sander port by itself. That gap is why fine dust leaks out around the hose instead of going into it.
The adapter grips the sander port on one end and your vac hose on the other, so you get a snug fit.
How to Connect a Shop Vac to the WEN HB6319
First, pull the dust bag off and clear any packed dust out of the port, so it fits snug.
Press the tool end of the PETG adapter onto the port. We print it to the size you measure, so a firm push holds it. Press your shop vac hose onto the other end. Turn the vac on before the belt touches wood.
Why a Small Belt Sander Still Needs a Vac
A 3 x 18 belt strips wood almost as fast as a bigger belt, so it makes almost as much dust. The fine part of that dust hangs in the air for hours and gets into your lungs.
A shop vac on the port pulls that fine dust away before it spreads. On a budget sander like the HB6319, a small printed adapter is the whole upgrade. Cheap tool, clean air.
WEN HB6319 Dust Collection FAQ
What fits the dust port on the WEN HB6319?+
Our PETG adapter does. One end presses onto the sander port. The other end takes your shop vac hose.
Does the WEN HB6319 work with a regular shop vac?+
Yes, with the right adapter. A shop vac hose and a tool port rarely match, so measure both. We print the GulpDust PETG adapter to your port measurement on one end and to your vac hose on the other.
Does the same adapter fit the WEN HB321V?+
Maybe. Port sizes can change between models. Measure the port on your tool and give us that number.
Do I need clamps or tape to attach the adapter?+
Usually not. We print the adapter to the size you measure, so you push it onto the port and it holds. The same goes for the vac hose end. Add a wrap of tape at any joint that sees heavy use.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
